Avery Dennison Power Stacker Provozní pokyny stáhnout pdf (Strana 7)

Getting Started 1-3

3. Align the stacker with the front of the knife.

4. Gently lift the stacker and center the guide tabs in the knife opening.

5. Set the stacker locating pins (on bottom of stacker) firmly in the mounting

plate holes.

Note: Height adjust bracket is only needed when

installing the stacker with a 938™ verifier.

Mounting plate holes

Stacker locating pin

Note

: To avoid damage to the motor, the stacker rollers and the front of

the knife must not be in direct contact. If they are, lower the

stacker’s feet by turning them. Turn the nut to lock the feet in place.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Žádné komentáře

Avery Dennison Power Stacker Provozní pokyny Strana 7