Avery-dennison 7411 Print Server Uživatelský manuál stáhnout pdf (Strana 42)

Configuring Network Protocols

1. Only configure the settings required for your network/printer. To enable

or disable protocols:

2. From the side menu, click Admin. The Web Admin Configuration screen

appears.

3. Click Protocol Control.

4. Check or uncheck the network and IP protocols to enable or disable the

necessary protocols.

Note: If you disable the TCP/IP protocol, all IP protocols are disabled

automatically.

5. Click Submit.

6. Click the reset link at the bottom of the screen. The Reset Server screen

appears.

7. Click Submit and wait five seconds for the printer to reset. Even though

you submitted your changes on the previous screen, they do not take

effect until you reset the printer.

You must re-enter your access password to make any further changes to

the printer settings.

4-18 Ethernet Operating Instructions

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Žádné komentáře

Avery-dennison 7411 Print Server Uživatelský manuál Strana 42